+- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum)
+-- Forum: Troubleshooting (https://www.elegoomars.com/forum/forumdisplay.php?fid=8)
+--- Forum: General Troubleshooting (https://www.elegoomars.com/forum/forumdisplay.php?fid=11)
+--- Thread: ¿Bad geometry? (/showthread.php?tid=1235)
¿Bad geometry? - Darihs - 09-11-2022
Hi, after change the FEP, i have print the orange game filler, it have a botom-regular fail of solidify, but, the transparent ones have geometry errors or some like.. Im using a Mars 3, i dont have seen a specific place in the forum but y think that this kind or fail print mus be seen before.
¿Any?