MARS2 Pro: is the LCD a so short time consumable? - Printable Version +- Elegoo 3D Printers Forum (https://www.elegoomars.com/forum) +-- Forum: Troubleshooting (https://www.elegoomars.com/forum/forumdisplay.php?fid=8) +--- Forum: General Troubleshooting (https://www.elegoomars.com/forum/forumdisplay.php?fid=11) +--- Thread: MARS2 Pro: is the LCD a so short time consumable? (/showthread.php?tid=1242) |
MARS2 Pro: is the LCD a so short time consumable? - fbtn40 - 10-02-2022 hello, would like to understand an issue, is it normal? I changed lcd friday, i printed friday night and saturday (always on printing in series), and between saturday night and today i had an issue as if the whole lcd was illuminating resin, so all the bed is printed but nothing more passed the first or few starting layers. When i tried to show logo this morning i had only a full highlighted screen with 2 horizontal bands... LCD is just 2 days old, no resin leak, and connection was redone before a new test with same result. Is the LCD a consumable part for only 2 days of active working? RE: MARS2 Pro: is the LCD a so short time consumable? - billtodd - 10-03-2022 My, bought new, Saturn failed after a few weeks :-( - contact your retailer or elegoo support if bought overseas. Elegoo support is actually good but very slow to reply (due to time of day differences, I guess) , they replaced my lcd free of charge . |