![[Image: 20201001-125314.jpg]](https://i.ibb.co/9pYTTXT/20201001-125314.jpg)
![[Image: 20201001-125302.jpg]](https://i.ibb.co/6Dbhp5p/20201001-125302.jpg)
![[Image: 20201001-125251.jpg]](https://i.ibb.co/HgNfq4d/20201001-125251.jpg)
![[Image: 20201001-125722.jpg]](https://i.ibb.co/tB89m1P/20201001-125722.jpg)
When taking photos I noticed there are some minor scratches on the film. I'm not sure if that could be causing the issue. The thin little pucks there are the result of the last print I tried a couple hours ago.
I've again taken everything out and cleaned it thoroughly as well as ran the 45 second exposure tray cleaning option on the machine. I just switched the standard grey resin out for an abs like clear blue resin. Going to try again and see if a different resin makes a difference.